background image

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

   

 

RESUME FUNCTION 

(POWER FAILURE RECOVERY)

1

2

SUPER SPIN DRY

 

The amount of laundry/once of spin

  Less than 5.0 kg

■ 

Setting time for spinning

 

You can manually set the time of spinning according to 

the following guide:

  If you would like to shorten the time of drying clothes in 

the room: 45 min

  If you would like to almost dry the synthetic clothes: 90 min

■ 

The clothes which cannot be performed spin drying

“SUPER SPIN DRY” program will use a long time to 
spin with high speed. Please do not spin the following 
clothes:

  •

 Easily color bleeding clothes

  •

 Easily wrinkled clothes (e.g. blouse, 100% cottons, or 

shirts)

  •

 Easily transformable clothes

  •

 Waterproofed clothes

1

Turn the POWER 

 and put the laundry in the wash tub.

2

 Press 

the 

 button to select the program.

   you cannot select “SUPER SPIN DRY”.

You cannot use “AUTO TUB DRY” if “SUPER SPIN 

 DRY” 

selected.

3

 Press 

the 

 button and select the desired time.

The “SUPER SPIN DRY” and “9 MIN” indicators will  

  light on and spinning time will display.

LED display shown

4

 Press 

the 

 button.

The pulsator will operate before the water is let into  

  the wash tub. The washer will estimate the amount of 
  laundry and display the detergent amount (while the
  lid is open).

5

 

Put the detergent as the display and close the lid.

If the lid is open during the operation, the washer 

  will stop before rinsing and spinning.

After the operation: 

the buzzer will beep when the washer 

completes the operation.

  •

 

Turn off the faucet and clean the cassette fi lter.

30

45

60

75

90

(off)

Select “SUPER SPIN DRY” only. 

1

Turn the POWER

and put the laundry in the wash tub.

2

 Press 

 button.

3

 Press 

 for select time.

The “SUPER SPIN DRY” and “9 MIN” indicators will  

  light on and spinning time will display.

4

 

Close the lid and press the

 button.

After the end of operation, there will be “beep” sound.

30

45

60

75

90

(off)

Select “SUPER SPIN DRY” from the 
(WASH, RINSE, SPIN) cycle.

3

2

4

1

(77L) 79L

(21L) 21L

At the set of “BLANKET” “TUB CLEAN” 

If the power supplies failure occurring while in operated, the washing 
machine shall be memorized remains process. After the power 

supplies are recovered, you can resume starting remain process by :

Press the

button to switch on the machine.

Observation: A sound will be heard about 5 seconds then
course and remains process indicator will blink.

Press the

button to start remain process.

Summary of Contents for AW-B1000GM





















Reviews: