CHAPTER 4 TRANSMISSION SEQUENCE
B-EP
Series
4-19
(4)
When interrupting communication while the 2nd label command is running, and then
retransmitting the 2nd label data from the beginning,
1st transmission:
{D0821,0458,0801|}
{C|}
{SG;0161,0339,0096,0300,2,BM[D6][10][00][00][00]
1st label data
[FF][FF][FF][FF][FF][FF]|}
{XS;I,0001,0000C2001|}
{D0821,0458,0801|}
{C|}
2nd label data (underway
{SG;0161,0339,0096,0300,2,BM[D6][10][00]
2nd transmission:
{D0821,0458,0801|}
{C|}
{SG;0161,0339,0096,0300,2,BM[D6][10][00][00][00]
2nd label data
[FF][FF][FF][FF][FF][FF]|}
{XS;I,0001,0000C2001|}
Print result:
The 1st label data is printed after the 1st transmission, and a command error
occurs after the 2nd transmission. (data reception continues until the number of
bytes specified by the graphic data in the initial transmission is obtained. Then,
a command error occurs when the end code of the command is checked.)
Transmits the 2nd label from
the beginning.
Interrupts communication while the
command is running.
