CHAPTER 4 TRANSMISSION SEQUENCE
B-EP
Series
4-21
4.2.3.4 PC SAVE COMMAND
When transmission is cancelled while PC saved data is transmitted from the application, the data
may not be properly stored because data subsequently transmitted is saved on the PC unless the
PC saved data has been transmitted before the transmission is cancelled.
If communication is interrupted while PC saved data is stored, it is necessary to issue the PC
Save Terminate Command, turn off and on the power of the printer, or reset the printer.
[Command transmission and storage results (Examples)]
(1) When transmitting PC saved data as usual,
{XO;25,S0,1|}
{D1430,0480,1400|}
{C|}
{LC;0000,0000,0050,0000,0,1|}
{LC;0000,0001,0050,0001,0,1|}
{LC;0000,0002,0050,0002,0,1|}
{LC;0000,0003,0050,0003,0,1|}
1st label data
{LC;0000,0004,0050,0004,0,1|}
{LC;0000,0005,0050,0005,0,1|}
{XS;I,0001,0000C1001|}
{XP|}
{XQ;25,S0,1,L|}
Storage result:
Data is properly stored.
