CHAPTER 5 TPCL MODE (INTERFACE COMMANDS)
B-EP
Series
5-14
5.4 COMMANDS RELATED TO FINE ADJUSTMENT
5.4.1
PRINT START POSITION FINE ADJUST COMMAND
[ESC] AX
Function
Adjusts the feed value so that the label will be shifted forward or backward from the
automatically positioned print start position.
Format
[ESC] AX; abbb, cddd, eff (, ghhh) [LF] [NUL]
Term
a:
Indicates the direction of the print position, forward or backward, in which a
fine adjustment is to be made.
+: Backward
-: Forward
bbb:
Fine adjustment value for print position
000 to 500 (in 0.1 mm units)
c:
Indicates the direction of the strip position, forward or backward, in which a
fine adjustment is to be made.
+: Backward
-: Forward
ddd:
Fine adjustment value for strip position
000 to 030 (in 0.1 mm units)
* In - (Forward) a fine adjustment is to be made between 000 and 020.
e:
Reserved
area
Fixed at +.
ff:
Reserved
area
Fixed at 00.
g:
Reserved area (Omissible)
hhh:
Reserved area (Omissible)
[Compatible mode for the B-SP series]
a:
Indicates the direction of the print position, forward or backward, in which a
fine adjustment is to be made.
+: Backward
-: Forward
bbb:
Fine adjustment value for print position
000 to 500 (in 0.1 mm units)
c:
Reserved
area
Fixed at +.
ddd:
Reserved
area
Fixed at 000.
e:
Reserved
area
Fixed at +.
ff:
Reserved
area
Fixed at 00.
