CHAPTER 5 TPCL MODE (INTERFACE COMMANDS)
B-EP
Series
5-24
5.5.2
CLEAR AREA COMMAND
[ESC] XR
Function
Clears the designated area or reverses the white/black dot pattern in the designated
area in the drawing area.
Format
[ESC] XR; aaaa, bbbb, cccc, dddd, e [LF] [NUL]
Term aaaa:
X-coordinate
of
the designated area start point
Fixed at 4 digits (in 0.1 mm units)
bbbb:
Y-coordinate
of
the
designated area start point
4 or 5 digits (in 0.1 mm units)
cccc:
X-coordinate of the designated area end point
Fixed at 4 digits (in 0.1 mm units)
dddd:
Y-coordinate
of
the designated area end point
4 or 5 digits (in 0.1 mm units)
e:
Type of how to clear
A: Clears the contents in the designated area to zeros.
B: Reverses the white/black dot pattern in the designated area.
Explanation
Label
Paper feed direction
0
X
Y
Effective
print length
Effective
print width
Start point
End point
Origin of
coordinates
(0, 0)
Backing paper
