< 1 >
MODIFICATION HISTORY
EAA-02465
EXTERNAL EQUIPMENT INTERFACE SPECIFICATION
Date
Modified
Pages
Description
Sep. 19, 2008
–
Newly published.
2-2
2.3 WEIGHT and 2.5 HEAD SPECIFICATION:
Values were changed.
3-4 to 7, 45,
46, 48, 49
3.2.3 TRANSMISSION CONTROL:
3.5.2 NOTES WHEN SENDING A COMMAND:
(including Ir packet error) was added to Command syntax error.
3-40, 41,
42, 51, 53,
74, 77
The following sections were added:
3.2.9/3.3.1/3.4.1/3.5.3/3.6.1/3.7.4/3.8.4
HANDLING OF RECEIVED DATA WHEN THE PRINTER GOES INTO
POWER SAVE MODE
3-43
3.5 RS-232C INTERFACE:
Received buffer was changed from 64K bytes to 512K bytes.
3-76
3.8.3.1 INFRASTRUCTURE MODE (ESS):
3.8.3.2 ADHOC MODE (IBSS):
Time-related description was added.
4-6 to 25 The following sections were added:
4.2.3 HANDLING OF RECEIVED DATA BY COMMAND
4.2.3.1 BIT MAP FONT FORMAT COMMAND
4.2.3.2 BARCODE/2-D CODE FORMAT COMMAND
4.2.3.3 GRAPHIC COMMAND
4.2.3.4 PC SAVE COMMAND
4-29 to 42 The following sections were added:
4.3.3 HANDLING OF RECEIVED DATA BY COMMAND
4.3.3.1 COMMAND PROCESSING
4.3.3.2 FORM STORE COMMAND
4.3.3.3 GRAPHIC DATA STORE COMMAND
4-47 to 51 The following sections were added:
4.4.3 HANDLING OF RECEIVED DATA BY COMMAND
4.4.3.1 PAGE MODE PROCESSING
4-56 to 60 The following sections were added:
4.5.3 HANDLING OF RECEIVED DATA BY COMMAND
4.5.3.1 PAGE MODE PROCESSING
5-1, 2,
6-1, 2
5.1/6.1 GENERAL DESCRIPTION:
Descriptions were changed.
5-7, 6-6
5.3.1/6.3.1 LABEL SIZE SET COMMAND:
Paper thickness was added to the lists.
May 11, 2009
5-14 to 16 5.4.1 PRINT START POSITION FINE ADJUST COMMAND:
[Explanation] (5) Descriptions were added.
[Explanation] under (5) was deleted.
[Strip position fine adjustment] Figures were changed when the label-to-label
gap is 3 mm. Figures were added when the gap is 7 mm.
(up to V1.0C) was added.
[Notes] (6), (7) and (8) were added.
