CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP
Series
5-59
c
When one field width < specified character string width
(Space between characters = 0, Specified character string digits = 6)
■
Print image when the parameter setting is omitted.
A = Specified character string width – 1 field width = 200 dots – 140 dots = 60 dots
B = A/Data length = 60 dots/4 = 15 dots
One character width = 1 character width + B = 35 dots + 15 dots = 50 dots
■
Print image when the parameter setting is specified.
* When the number of print data is 6 digits or more, the condition of ineffectiveness (3) is satisfied.
In this case, the characters are printed in normal width.
d
When one field width < specified character string width
(Space between characters
≥
0, Specified character string digits = 5)
■
Print image when the parameter setting is omitted.
A = Specified character string width – 1 field width = 200 dots – 155 dots = 45 dots
B = A/Data length = 45 dots/4
≈
11 dots
One character width = 1 character width + B = 35 dots + 11 dots = 46 dots
■
Print image when the parameter setting is specified.
* When the number of print data is 5 digits or more, the condition of ineffectiveness (3) is satisfied.
In this case, the characters are printed in normal width.
A B C
D
One character width (35 dots)
Specified character string width (200 dots)
1 field width (140 dots)
A
A
B
C
D
Specified character string width (199 dots)
One character width (46 dots)
Space between characters (5 dots)
1 field width (155 dots)
A
A
B
C
D
One character width (35 dots)
Specified character string width (200 dots)
Space between characters (5 dots)
A
B
C
D
Specified character string width (200 dots)
One character width (50 dots)
