CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP
Series
5-72
H: UPC-E + 5 digits
I: EAN8 + 2 digits
J: EAN8 + 5 digits
K: UPC-A
L: UPC-A + 2 digits
M: UPC-A + 5 digits
N:
UCC/EAN128
N:
EAN128
R: Customer barcode
S: Highest priority customer barcode
U:
POSTNET
V:
RM4SCC
W:
KIX
code
(4)
Type of check digit
When no check digit is attached, a barcode of the data row will be drawn.
In the case of the check digit check, when each check digit check is performed according
to the type of barcode and results in normal, a barcode will be drawn. If the check digit
is not proper, the barcode will not be drawn.
When the check digit is automatically attached, each check digit is attached according to
the type of barcode when a barcode is drawn.
If the type of barcode is CODE93, CODE128 (with auto code selection), or UCC/EAN128
or EAN128, the check digit will always be attached regardless of the designation of the
type of check digit.
If the type of barcode is JAN, EAN or UPC, the designation of no check digit attachment
automatically assumes the check digit check.
* DBP Modulus 10 is Modulus 10 for Deutsche Bundespost Postdienst only.
