CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP
Series
5-184
Nibble mode
1
30H
2
30H
3
33H
4
30H
5
30H
6
30H
7
30H
8
30H
•
•
•
•
•
•
•
•
126
30H
127
33H
128
3FH
129
30H
130
30H
131
30H
132
30H
Hex. mode
1
00H
2
30H
3
00H
4
00H
5
38H
•
•
•
•
•
63
00H
64
3FH
65
00H
66
00H
[Nibble
mode]
(1)
The graphic data is separated into four dot units and sent in above-mentioned order (
1
→
132
). (Upper digit: “3”)
(2)
The graphic data is 30H to 3FH.
(3)
The minimum unit in the X direction is 8 dots. Dots with no data are transmitted as data
0.
(4)
The graphic data count must be as follows:
Graphic data count = {(No. of graphic width dots + 7)/8} × No. of graphic height dots × 2
* The value in the brackets is rounded down to the nearest whole number.
[Hex.
mode]
(1)
The graphic data is separated into eight dot units and sent in above-mentioned order (
1
→
66
).
(2)
The graphic data is 00H to FFH.
(3)
The minimum unit in the X direction is 8 dots. Dots with no data are transmitted as data
0.
(4)
The graphic data count must be as follows:
Graphic data count = {(No. of graphic width dots + 7)/8} × No. of graphic height dots
* The value in the brackets is rounded down to the nearest whole number.
8
8
8
Graphic width 19 dots
Print origin of
coordinates
Graphic
height
22 dots
4
4
4
4
4
4
