CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP
Series
5-186
Notes
(1)
The print origin of coordinates must be set so that the result of drawing the graphic data
will be within the effective print area set by the Label Size Set Command ([ESC] D).
(2)
The number of graphic width dots and the number of graphic height dots must also be set
so that the result of drawing the graphic data will be within the effective print area set by
the Label Size Set Command ([ESC] D) in the same manner as the above.
(3)
Both width and height are 8 dots/mm in case of the 203 dpi-print head model.
(4)
The actual result of drawing may deviate within ± 0.5 mm in case of the 203 dpi-print
head model, in the X direction with respect to the designated print origin of the X-
coordinate.
To draw the received graphic data at high speed, the data is directly developed in the
image buffer without applying correction to each bit with respect to the designated X-
coordinate. Consequently, an error of up to 4 bits occurs.
