CHAPTER 6 LABEL MODE (INTERFACE COMMANDS)
B-EP
Series
6-42
jj:
Data
length
00 to 99
NOTES:
1. A two-digit value (00 to 99) is also available.
2. When “00” is designated, the length is equivalent to the data
sent by the Data Print Command.
(JIS8 code: Data which is delimited by [LF])
Data having a max. of 2000 digits is acceptable.
3. In IrDA: TEC Protocol, when the data length value is set to
250 or more, it can be sent by using the multiple packet format
for the Data Print Command in several packets.
k:
Data
code
1 (Fixed value): JIS8 code
l:
Fixed data No.
0 (Fixed value)
