CHAPTER 6 LABEL MODE (INTERFACE COMMANDS)
B-EP
Series
6-47
Ciiijjj: No. of cells (Omissible. If this parameter is omitted, it is automatically set.)
iii: No. of cells in the X direction
000 to 144
jjj: No. of cells in the Y direction
000 to 144
NOTE:
Cell setting varies according to the ECC type.
ECC000 to ECC140
ECC200
No. of cells to be
designated
Odd numbers only
Even numbers only
Min./Max. No. of cells
9 × 9 to 49 × 49
10 × 10 to 144 × 144
Rectangular code
None
18 × 8
32 × 8
26 × 12
36 × 12
36 × 16
48 × 16
• When this parameter is omitted, the number of cells is automatically set.
Also, when data except for the above values is designated for Nos. of cells in
the X and Y directions, the number of cells is automatically set.
Jkkllmmmnnn:
Connection
setting
(Omissible: No connection if this parameter is omitted)
kk:
Code number
01 to 16
ll:
No. of divided codes
01 to 16
mmm: ID number
001 to 254
nnn:
ID number 2
001 to 254
NOTE:
It is effective only when ECC200 is selected.
ooo:
Data
length
000 to 100
NOTES:
1. A two-digit value (00 to 99) is also available.
2. When “00” is designated, the length is equivalent to the data
sent by the Data Print Command (data which is delimited by
[LF].)
3. When “00” is designated, the length is equivalent to the data
sent by the Data Print Command. It corresponds for up to
2000 digits.
p:
Data
code
1 (Fixed value): JIS8 code
q:
Reserved
area
0:
Fixed
value
