CHAPTER 6 LABEL MODE (INTERFACE COMMANDS)
B-EP
Series
6-58
Status in the compatible mode for B-SP series
00H: Normal state (idling)
01H: Cover open state
02H: Command syntax error (including Ir packet error)
03H: Paper jam
04H: Label end (including ambient temperature error)
05H: Cover open error
06H: Broken thermal head dots error
07H: Thermal head excessive temperature
including abnormal battery temperature and battery
excessive temperature
08H: Flash ROM write error
09H: Flash ROM erase error
0AH: Low battery (Print failure)
0BH:
Printer
operating
including the following statuses: wait for strip, pause
state, writable character/PC command save mode,
wait for battery recovery and wait for print head/motor
temperature reduction
0DH: Normal end + Label end
0EH: Flash ROM storage area full state
10H: Normal issue end
37H: Charging error
38H: Bluetooth setting successfully completed
39H: Bluetooth setup error (including initialization error)
Battery status ........ The battery charge status is indicated in 5 levels.
(B-EP2DL)
01H: 7.2 V or less (Print failure)
02H: 7.3 V to 7.4 V
(Remaining No. of printable labels: Approx. 1 to 30)
03H: 7.5 V to 7.7 V
(Remaining No. of printable labels: Approx. 30 to 150)
04H: 7.8 V to 7.9 V
(Remaining No. of printable labels: Approx. 150 to 300)
05H: 8.0 V to 8.4 V
(Remaining No. of printable labels: Approx. 300 min.)
(B-EP4DL)
01H: 14.0 V or less (Print failure)
02H: 14.1 V to 14.6 V
(Remaining No. of printable labels: Approx. 1 to 30)
03H: 14.7 V to 15.2 V
(Remaining No. of printable labels: Approx. 30 to 150)
04H: 15.3 V to 15.9 V
(Remaining No. of printable labels: Approx. 150 to 300)
05H: 16.0 V to 16.8 V
(Remaining No. of printable labels: Approx. 300 min.)
* The remaining number of printable labels may vary according to
the contents to be printed and the ambient environment.
