CHAPTER 6 LABEL MODE (INTERFACE COMMANDS)
B-EP
Series
6-88
6.14.2 BLUETOOTH RELATED PARAMETER ACQUIRE COMMAND [ESC] WT
Function
Acquires the parameter settings related to the Bluetooth.
Format
[ESC] WT [LF] [NUL]
Explanation
(1) This command reads the parameters related to the Bluetooth. When using the
IrDA, the following information field is placed in the information frame and sent to
the host.
[Information field to be sent when IrDA: TEC Protocol is used]
STX Sec Inq
Interval
Window
02H 3xH 3xH 3xH 3xH 3xH 3xH 3xH 3xH 3xH 3xH
Inquiry/page window
0018 to 4096
Inquiry/page interval
0018 to 4096
Inquiry timer
0 (30H): Inquiry is not possible.
1 (31H): Inquiry is possible only within 60 seconds after a
printer power on
2 (32H): Inquiry is possible at anytime.
Security setting
1 (31H): No security
2 (32H): No security
3 (33H): Link level security is effective
Bluetooth device name
CRC
32 bytes
xxH xxH
Bluetooth device name: Fixed at 32 bytes.
When the Bluetooth device name is “TOSHIBA TEC BT.”
[54H]
[4FH]
[53H]
[48H]
[49H]
[42H]
[41H]
[20H]
[54H] [45H] [43H] [20H] [42H] [54H] [00H] [00H]
T O S H I B A ‘
’ T E C ‘
’ B T
[00H] [00H] [00H] [00H] [00H] [00H] [00H] [00H] [00H] [00H] [00H] [00H] [00H] [00H] [00H] [00H]
* When the Bluetooth device name is less than 32 bytes, the remaining bytes are filled
with 00H.
[Information field to be sent when IrDA: IrCOMM, IrDA: IrOBEX, USB, RS-232C,
Bluetooth or Wireless LAN is used]
STX Sec Inq
Interval
Window
02H 3xH 3xH 3xH 3xH 3xH 3xH 3xH 3xH 3xH 3xH
Bluetooth device name
32 bytes
