CHAPTER 7 RECEIPT MODE (INTERFACE COMMANDS)
B-EP
Series
7-1
7. RECEIPT MODE (INTERFACE COMMANDS)
7.1 GENERAL
DESCRIPTION
This chapter describes details regarding the interface commands for the RECEIPT and RECEIPT1
modes of the print mode. If operations are the same between the RECEIPT mode and the
RECEIPT1 mode, only “RECEIPT mode” is described in explanations, and the RECEIPT1 mode is
included. If operations are different between them, the RECEIPT mode (Mode = 1 or 3) or the
RECEIPT1 mode (Mode = 2) is specified. In the RECEIPT mode, only batch issues are supported.
This printer has 2 modes: standard mode and page mode.
In standard mode, the printer performs a print job or feeds paper every time the line feed command
([LF]) is received. In page mode, however, all received line feed commands ([LF]) are just
expanded in the print area on the memory and the printer does not operate. Once the Page Mode
Print Command ([FF]) is executed, the printer prints all data expanded in the print area in a collective
manner.
Either of the language types, Kanji, Chinese and Korean, can be implemented. Any font other than
the on-board fonts is selectable.
Printing
Standard mode
Page mode
Line feed command
([LF])
Page mode select
command ([GS] C)
Page mode print
command ([FF])
Page mode cancel
command ([CAN])
Printing
Clearing
drawing buffer
Line feed command
([LF])
