CHAPTER 7 RECEIPT MODE (INTERFACE COMMANDS)
B-EP
Series
7-12
7.5 COMMANDS RELATED TO DRAWING FORMAT
7.5.1
LINE FORMAT COMMAND
[ESC] L
Function
Specifies the line format and draws it.
Format
[ESC]
Labbb
[ESC] Lcddeeee
Term
a:
Line
width
1 to 9 (in units of dots)
bbb:
Line
length
001 to 999 (in units of dots)
c:
Expansion
parameter
e (Command parameter expansion designated)
dd:
No. of line width dots
01 to 99 (in units of dots)
Note that any value of 9 or more is corrected to 9.
eeee: No. of line length dots
0001 to 1296 (in units of dots)
Explanation
(1) The print position of the line is shown below:
Paper feed direction
100
Effective print width (Width of head)
456
DEF
ABC
Left margin: 0 dot,
Alignment: Left
Alignment: Right
Offset: 100 dots,
Alignment: Center
Left margin: 100 dots
Initial value: 000 dot
Line
ABC
ABC [LF]
100 dots
3 dots
[ESC] C +100 [ESC] a1 ABC [LF]
[ESC] H100 ABC [LF]
Width of receipt
DEF [ESC] L3100 [LF]
[GS] k04940045 [NUL] [LF]
[ESC] H000 [ESC] a0 456 [LF]
4 9 4 0
0 4 5 8
ABC
123
[ESC] a2 123 [LF]
100
[Enlarged view]
