CHAPTER 8 ESC/POS MODE (INTERFACE COMMANDS)
B-EP
Series
8-91
Printer status
Printer status is indicated in 2-byte data.
“00”:
Normal
state
“01”:
Cover
open
state
“02”:
Operating
“04”:
Pause
state
“05”: Wait for strip
“06”:
Command
syntax
error
(including Ir packet error)
“09”: Normal issue end + Label end
“11”:
Paper
jam
“13”:
Label
end
“15”: Cover open error
“17”: Broken head dots error
“18”: Thermal head excessive temperature
“19”: Ambient temperature error
“32”: Abnormal battery temperature
“33”: Battery excessive temperature
“36”:
Low
battery
“37”:
Charging
error
“39”: Bluetooth setup error (including initialization error)
“45”: Wait for battery recovery
“46”: Wait for head temperature reduction
“47”: Wait for motor temperature reduction
“50”: Flash ROM write error
“51”: Flash ROM erase error
“54”: Flash ROM storage area full state
“55”: Writable character/PC command save mode
Remaining No. of labels:
Indicates the remaining number of labels in four bytes.
“0000” to “9999”
Length:
Indicates the number of bytes of the entire status data
IrDA: TEC Protocol: Fixed at "22."
IrDA: IrCOMM, IrDA: IrOBEX, USB, RS-232,
Bluetooth or wireless LAN: Fixed at "23."
Receive buffer free space: Indicates the free space of the receive buffer.
Entire receive buffer free space:
Indicates the entire free space of the receive buffer.
Fixed at "00512."
CRC/CR, LF:
Indicates the end of the status block.
