CHAPTER 9 ERROR PROCESSING
B-EP
Series
9-3
9.3 ERRORS IN ISSUING OR FEEDING
9.3.1 PAPER JAM / LABEL END / NORMAL END + LABEL END
B-EP (It does not matter whether the compatibility setting for the B-SP series is on or off.)
Paper jam
Label end
Normal end + label end
While passing over the media sensor,
the label is fed over the distance 1.5
times as long as the label pitch (label
gap length) specified by the
command, but the media sensor (or
transmissive sensor) cannot detect a
gap between the labels.
When (or before) the motor is driven
for feeding or printing, the media
sensor (transmissive sensor or
reflective sensor) detects the label
end state.
While printing is being performed on
the label with the transmissive sensor
designated, the media sensor
(transmissive sensor or reflective
sensor) detects the label end state for
1 mm continuously after the effective
print length of the current label is
printed.
The tag paper is fed over the distance
1.5 times as long as the tag pitch
(length of the white p black
mark length) specified by the
command, but the media sensor (or
reflective sensor) cannot detect a
black mark.
While printing is being performed on
the label with the transmissive sensor
designated, the media sensor
(transmissive sensor or reflective
sensor) detects the label end state for
1 mm continuously before the
effective print length of the current
label is printed.
While printing is being performed on
the tag paper with the reflective
sensor designated, the media sensor
(transmissive sensor or reflective
sensor) detects the label end state for
1 mm continuously after the effective
print length of the current label is
printed.
While a gap between labels is
passing over the media sensor, the
label is fed over the distance 1.5
times as long as the label pitch (label
gap length) specified by the
command, but the label cannot be
detected.
While printing is being performed on
the tag paper with the reflective
sensor designated, the media sensor
(transmissive sensor or reflective
sensor) detects the label end state for
1 mm continuously before the
effective print length of the current
label is printed.
While printing is being performed on
the receipt with no sensor designated,
the media sensor (transmissive
sensor or reflective sensor) detects
the label end state for 1 mm
continuously after the effective print
length of the current label is printed.
While a black mark is passing over
the media sensor, the tag paper is fed
over the distance 1.5 times as long as
the tag pitch (length of the white
p black mark length) specified
by the command, but the white
portion cannot be detected.
With the automatic label print
positioning enabled, and the
transmissive sensor designated, the
label is loaded, and the cover is
opened and closed.
If the label pitch is 170 mm or less,
the backing paper is fed over the
distance of 170 mm, but the label
cannot be detected.
While printing is being performed on
the label with the transmissive sensor
designated, the media sensor
(transmissive sensor) detects the
backing paper for xx mm continuously
before the effective print length of the
current label is printed.
“xx mm” varies depending on the gap
length:
21 mm for a 3-mm gap
22 mm for a 4-mm gap
23 mm for a 5-mm gap
24 mm for a 6-mm gap
25 mm for a 7-mm gap
While printing is being performed on
the label with the transmissive sensor
designated, the media sensor
(transmissive sensor) detects the
backing paper for xx mm continuously
after the effective print length of the
current label is printed.
“xx mm” varies depending on the gap
length:
21 mm for a 3-mm gap
22 mm for a 4-mm gap
23 mm for a 5-mm gap
24 mm for a 6-mm gap
25 mm for a 7-mm gap
If the label pitch is longer than 170
mm, the label is fed over the distance
1.5 times as long as the label pitch
(label gap length) specified
by the command, but the label cannot
be detected.
TPCL / LABEL
With the automatic label print
positioning enabled, and the reflective
sensor designated, the tag paper is
loaded, and the cover is opened and
closed.
If the tag pitch is 170 mm or less, the
black mark is fed over the distance of
170 mm, but the white portion cannot
be detected.
While printing is being performed on
the tag paper with the reflective
sensor designated, the media sensor
(reflective sensor) detects the black
mark over for xx mm continuously
before the effective print length of the
current label is printed.
“xx mm” varies depending on the
length of the black mark:
21 mm for a 3-mm black mark
22 mm for a 4-mm black mark
23 mm for a 5-mm black mark
24 mm for a 6-mm black mark
25 mm for a 7-mm black mark
While printing is being performed on
the tag paper with the reflective
sensor designated, the media sensor
(reflective sensor) detects the black
mark for xx mm continuously after the
effective print length of the current
label is printed.
“xx mm” varies depending on the
length of the black mark:
21 mm for a 3-mm black mark
22 mm for a 4-mm black mark
23 mm for a 5-mm black mark
24 mm for a 6-mm black mark
25 mm for a 7-mm black mark
