CHAPTER 10 SYSTEM MODE (INTERFACE COMMANDS)
B-EP
Series
10-7
10.7 COMMANDS RELATED TO FINE ADJUSTMENT
10.7.1 PRINT START POSITION FINE ADJUST COMMAND
[ESC] AX
Function
Adjusts the feed value so that the label will be shifted forward or backward from the
print start position automatically determined.
Format
[ESC] AX; abbb, cddd, eff(, g) [LF] [NUL]
Term
a:
Indicates the direction, forward or backward, in which a fine adjustment is to be
made.
+:
Backward
-: Forward
bbb:
Fine adjustment value for print position
000 to 500 (in 0.1 mm units)
c:
Indicates the direction of the strip position, forward or backward.
+:
Backward
-:
Forward
ddd:
Fine adjustment value for strip position
000 to 030
* In - (Forward) a fine adjustment is to be made between 000 and 020.
e:
Reserved
area
Fixed at +.
ff:
Reserved
area
Fixed at 00.
g:
Reserved area (Omissible)
hhh:
Reserved area (Omissible)
[In compatible mode for the B-SP series]
a:
Indicates the direction, forward or backward, in which a fine adjustment is to be
made.
+:
Backward
-:
Forward
bbb:
Fine adjustment value for print position
000 to 500 (in 0.1 mm units)
c:
Reserved
area
Fixed at +.
ddd:
Reserved
area
Fixed at 000.
e:
Reserved
area
Fixed at +.
ff:
Reserved
area
Fixed at 00.
g:
Reserved area (Omissible)
hhh:
Reserved area (Omissible)
