CHAPTER 11 OTHER FUNCTIONS
B-EP
Series
11-13
[The compatible mode for the B-SP series is on.]
* The values in the upper cell are provided for LABEL/RECEIPT mode (1 byte HEX).
The values in the lower cell are provided for TPCL mode (2 bytes ASCII).
No.
LCD Message of the
Upper Line
(English)
Printer Status
Detail Status
Auto Status
Transmission
Status Request
Command
1
ON LINE
The printer is in the online mode.
00H
“00”
ON LINE
The printer is in the online mode (or
communicating).
0BH
“02”
LBL PRESENT ****
A label is waiting to be stripped.
0BH
“02”
ON LINE
A label issue has been completed normally.
10H
*1
“40”
ON LINE
A feed has been completed normally.
“41”
ON LINE
A head broken dots check has been completed
normally.
00
ON LINE
Initialization has been completed normally.
10H
2
COVER OPEN
The front cover was opened in the online mode.
01H
“01”
3
PAUSE ****
The printer is in a pause state.
0BH
“02”
4
COMMS ERROR
A parity error, overrun error, or framing error has
occurred during communication through the RS-
232C interface.
0CH 0CH
5
PAPER JAM ****
A paper jam has occurred during a paper feed.
03H
03H
“11” “11”
6
NO PAPER ****
The paper has run out.
04H
04H
“13” “13”
7
NO PAPER
A label has been completed normally, and then the
paper has run out.
0DH 0DH
“09” “09”
8
COVER OPEN
An attempt was made to feed or issue with the
cover opened (except the [PAUSE] key).
05H 05H
“15” “15”
9
HEAD ERROR
A broken element has been found on the thermal
head.
06H 06H
“17” “17”
10
EXCESS HEAD TEMP
The print head temperature has exceeded 71
°
C. 07H 07H
“18” “18”
11
ON LINE
The printer is in writable character or PC command
save mode
0BH
“02”
12
FORMAT ERROR
An erase error has occurred in formatting the flash
memory.
09H 09H
“51” “51”
13
FLASH WRITE ERR.
An error has occurred in writing data into the flash
memory.
08H 08H
“50” “50”
