CHAPTER 3 INTERFACE
B-EP
Series
3-48
[TPCL mode]
Data to be sent
SOH STX
Status
Remaining No. of labels
ETX EOT CR
LF
01H 02H 3xH 3xH 3xH
3xH
3xH
3xH
3xH
03H 04H 0DH 0AH
• Detailed status is indicated in 2-byte data.
“00”:
Normal
state
“01”: Cover open state
“02”:
Operating
“04”:
Pause
state
“05”: Wait for strip
“06”: Command syntax error (including Ir packet error)
“09”: Normal issue end + Label end
“11”:
Paper
jam
“13”:
Label
end
“15”: Cover open error
“17”: Broken head dots error
“18”: Thermal head excessive temperature
“19”: Ambient temperature error
“32”: Abnormal battery temperature
“33”: Battery excessive temperature
“36”:
Low
battery
“37”:
Charging
error
“38”: Bluetooth setting successfully completed
(
→
No response with Status Request Command)
“39”: Bluetooth setup error (including initialization error)
(
“40”: Normal issue end) Response status for automatic status transmission
(
“41”: Normal feed end) Response status for automatic status transmission
“45”: Wait for battery recovery
“46”: Wait for head temperature reduction
“47”: Wait for motor temperature reduction
“50”: Flash ROM write error
“51”: Flash ROM erase error
“54”: Flash ROM storage area full state
“55”: Writable character/PC command save mode
