manualshive.com logo in svg

Toshiba B-EV4 Series, Manual

The Toshiba B-EV4 Series user manual is available for free download on 88.208.23.73:8080. This comprehensive manual provides detailed instructions on operating and maintaining your Toshiba B-EV4 printer. Easily access and download the manual to optimize your experience with this high-quality product.

Share
Download
background image

 

ii

6.3.18  STORAGE AREA ALLOCATE COMMAND ..................................................................... 143 
6.3.19 FLASH MEMORY FORMAT COMMAND ........................................................................ 145 
6.3.20  SD CARD FORMAT COMMAND ..................................................................................... 146 
6.3.21  BIT MAP WRITABLE CHARACTER COMMAND ............................................................ 147 
6.3.22 GRAPHIC COMMAND ..................................................................................................... 154 
6.3.23 SAVE START COMMAND ............................................................................................... 162 
6.3.24 SAVE TERMINATE COMMAND ...................................................................................... 163 
6.3.25 SAVED DATA CALL COMMAND..................................................................................... 164 
6.3.26 RESET COMMAND..........................................................................................................  165 
6.3.27 STATUS REQUEST COMMAND..................................................................................... 166 
6.3.28  RECEIVE BUFFER FREE SPACE STATUS REQUEST COMMAND ............................ 167 
6.3.29 VERSION INFORMATION ACQUIRE COMMAND ......................................................... 169 
6.3.30  SD CARD INFORMATION ACQUIRE COMMAND ......................................................... 170 
6.3.31 PRINTER INFORMATION STORE COMMAND.............................................................. 172 
6.3.32 PRINTER INFORMATION REQUEST COMMAND......................................................... 173 
6.3.33  IP ADDRESS SET COMMAND……………………………………………………………... .  174 
6.3.34  SOCKET COMMUNICATION PORT SET COMMAND………………………………… ....  175 
6.3.35  DHCP FUCTION AND DHCP CLIENT ID SET COMMAND………………………………   176 

6.4 

COMMANDS FOR SYSTEM ADMINISTRATOR.................................................................. 177 

6.4.1 PARAMETER 

SET COMMAND ....................................................................................... 178 

6.4.2 FINE 

ADJUSTMENT 

VALUE SET COMMAND ............................................................... 183 

6.4.3 BATCH 

RESET COMMAND ............................................................................................ 185 

 

7. CONTROL 

CODE SELECTION................................................................................................. 186 

 

8. ERROR 

PROCESSING.............................................................................................................. 187 

8.1 COMMUNICATION ERRORS ............................................................................................... 187 
8.2 

ERRORS IN ISSUING OR FEEDING ................................................................................... 187 

8.3 

ERRORS IN WRITABLE CHARACTER AND PC COMMAND SAVE MODES....................  189 

 

9. STATUS 

RESPONSE ................................................................................................................ 190 

9.1 SERIAL 

INTERFACE............................................................................................................. 190 

9.1.1 FUNCTIONS..................................................................................................................... 190 
9.1.2 STATUS FORMAT ...........................................................................................................  190 
9.1.3 DETAIL STATUS.............................................................................................................. 191 

9.2 PARALLEL 

INTERFACE ....................................................................................................... 192 

 

10. LED INDICATIONS .................................................................................................................... 194 

 

11. CHARACTER CODE TABLE ....................................................................................................  196 

11.1  TIMES ROMAN, HELVETICA, LETTER GOTHIC, PRESTIGE ELITE, COURIER ..............  196 
11.2 PRESENTATION................................................................................................................... 203 
11.3 OCR-A ................................................................................................................................... 207 
11.4 OCR-B ................................................................................................................................... 214 
11.5 TEC 

OUTLINE FONT 1 ......................................................................................................... 220 

11.6 KANJI 

.................................................................................................................................... 227 

Summary of Contents for B-EV4 Series

























































































































































































































































































Reviews:

No comments

Related manuals for B-EV4 Series

3nStar SC550 Programing Manual preview
SC550
Brand: 3nStar Pages: 51
M3 Mobile Wearable Ring Scanner User Manual preview
Wearable Ring Scanner
Brand: M3 Mobile Pages: 35
Postech MS3391-L User Manual preview
MS3391-L
Brand: Postech Pages: 41
POSIFLEX LS-1000 Series User Manual preview
LS-1000 Series
Brand: POSIFLEX Pages: 22
Microscan MS-820 Quick Start Manual preview
MS-820
Brand: Microscan Pages: 10
AsReader ASR-020D Parameter Manual preview
ASR-020D
Brand: AsReader Pages: 162
Datalogic Magellan 800i Reference Manual preview
Magellan 800i
Brand: Datalogic Pages: 184
Winlong Industrial SCC-RF-MI-C40 User Manual preview
SCC-RF-MI-C40
Brand: Winlong Industrial Pages: 11
NESS ID TECK RF30 User Manual preview
RF30
Brand: NESS ID TECK Pages: 8
Trust CR-1420P User Manual preview
CR-1420P
Brand: Trust Pages: 2
Trust CR-1200 Manual preview
CR-1200
Brand: Trust Pages: 7
Rosslare DigiTool GA-01 Installation Manual preview
DigiTool GA-01
Brand: Rosslare Pages: 2
Rosslare AY-Z12A Installation Manual preview
AY-Z12A
Brand: Rosslare Pages: 17
Rosslare AY-U910 Installation And User Manual preview
AY-U910
Brand: Rosslare Pages: 23
Rosslare AY-Q6250 Installation And Programming Manual preview
AY-Q6250
Brand: Rosslare Pages: 32
Unitech HT6 Series Programming Manual preview
HT6 Series
Brand: Unitech Pages: 105
Johnson Controls KT-MUL-MT-KP Installation Sheet preview
KT-MUL-MT-KP
Brand: Johnson Controls Pages: 4
Saveo Scan SAVEO-RNG-G2 Quick Setup Manual preview
SAVEO-RNG-G2
Brand: Saveo Scan Pages: 2

Brands by name

Popular brands

Load more brands