2. PRINTER SETUP
ENGLISH VERSION EO1-33089
2.6 Printer Setting
E2-20
2.6.2 Parameter Setting
(Cont.)
(5) PEEL OFF STATUS
This parameter is to choose whether the printer sends a strip wait
status to the host in response to a status request command.
•
OFF
•
ON
(6) USB I/F STATUS
This parameter is to choose whether or not to return a response to the
host via USB.
•
OFF
Disables sending a response via USB
•
ON
Enables sending a response via USB
(7) FEED KEY
This parameter is to choose the function of the FEED key.
•
FEED
Feeds one label.
•
Prints data in the image buffer (The last printed data)
(8) KANJI CODE
This parameter is to choose a KANJI code.
•
TYPE1 Windows
code
•
TYPE2 Original
code
After selecting a Kanji code, press [ENTER] key
(9) EURO CODE
This parameter is to choose a Euro code (€).
“20” to “FF” (Specify the hex code in 2 bytes of ASCII code)
(10) AUTO HD CHK
This parameter is to choose whether to perform the auto print head
check at a power on time.
•
OFF
Auto print head check is not performed.
•
ON
Auto print head check is performed.
FF
20
FE
21
