APPENDIX 1 MESSAGES AND LEDS
ENGLISH VERSION EO1-33094
APPENDIX 1 MESSAGES AND LEDS
EA1- 1
APPENDIX 1 MESSAGES AND LEDS
Appendix 1 describes the LCD messages displayed on the operation panel.
Symbols in the message
1:
: The LED is illuminated.
: The LED is flashing.
: The LED is unlit.
2: %%,%%%,%%%: Remaining memory size of the external memory: 0 to 09,999,999 (in K bytes)
3: ####: Remaining memory size for PC commands storage area in the internal memory: 0 to 3072 (in
K bytes)
4: &&&&: Remaining memory size for writable characters storage area: 0 to 3147 (in K bytes)
LED Indication
Printer Status
Restoration by
RESTART key
Acceptance of
Status Request/
Reset Command
No.
LCD Message
ONLINE ERROR
Yes/No
Yes/No
ON LINE
In online mode
-----
Yes
1
ON LINE
In online mode (The printer is
communicating)
-----
Yes
2 HEAD OPEN
The print head block is open in
online mode.
-----
Yes
3 PAUSE
The printer is paused.
Yes
Yes
4 COMMS ERROR
A parity, overrun, or framing error
has occurred during communication
through the RS-232C.
Yes
Yes
5 PAPER JAM
The media is jammed during paper
feed.
Yes
Yes
6 CUTTER ERROR
A problem has occurred with the
cutter module.
Yes
Yes
7 NO PAPER
The media has run out, or the
media is not loaded properly.
Yes
Yes
8 NO RIBBON
The ribbon has run out.
Yes
Yes
9 HEAD OPEN
Feed or printing was attempted with
the print head block open.
Yes
Yes
10 HEAD ERROR
There is a problem with the print
head.
Yes
Yes
11 EXCESS HEAD TEMP
The print head has overheated.
No
Yes
12 RIBBON ERROR
The ribbon has been torn. A
problem has occurred with the
sensor that determines the torque
for the ribbon motor.
Yes
Yes
13 REWIND FULL
An overflow error has occurred in
the rewind unit.
Yes
Yes
14
SAVING####KB/&&&&KB
or
SAVING%,%%%.%%%KB
Writable character or PC command
save mode
-----
Yes
15
FORMAT####KB/&&&&KB
or
FORMAT%,%%%.%%%KB
The storage area is being
initialised.
-----
Yes
16 NOW LOADING…
TrueType font or BASIC program is
being downloaded.
-----
Yes
17 MEMORY WRITE ERR.
An error has occurred while writing
to flash memory or USB memory.
No
Yes
18 FORMAT ERROR
An erase error has occurred while
formatting the flash memory or
USB memory.
No
Yes
19 MEMORY FULL
Data cannot be stored because the
flash memory or USB memory is
full.
No
Yes
