2. PRINTER SETUP
ENGLISH VERSION EO1-33094
2.6 Printer Setting
E2-38
2.6.11 Real Time Clock (RTC)
The RTC menu allows the date and time to be set, enables the
battery check function, and selects the RTC data renewal timing
while labels are being printed.
The Real Time Clock Setting is effective only when an optional
RTC & USB Host Interface Card, B-EX700-RTC-QM-R, is
installed.
(1) DATE TIME
This parameter is to set date and time.
YY/MM/DD
hh:mm:ss
(2) BATTERY CHECK
Enable the low battery check function.
•
OFF
•
ON
(3) RENEWAL
This parameter is to choose when date and time are updated
while printing.
•
BATCH
The real time clock data is read only for the
first label in a batch, the same time is printed
on the all labels.
•
PAGE
The real time clock data is read at the start of
printing each label, the real time can be
printed on each label.
SYSTEM MODE
<8>BASIC
<9>FOR FACTORY
<10>RFID
<11>RTC
00
00
00
00
00
00
[RIGHT]
