-4-
5.2 KEY FUNCTIONS
[POWER] key
(1) Turns the printer power on from a power off state and initializes the printer.
(2) Performs various parameter settings.
[FEED] key:
(1) Feeds or ejects 1 label. This key is also used to adjust a label to a proper position.
When the label is not properly positioned, feed 1 or 2 blank labels using this key before
printing so that the printer can start printing at the proper position.
(2) Prints data in the image buffer on one label (depending on TPCL1 mode, LABEL mode).
NOTE:
During printing initiated by the [FEED] key, a Clear command or a drawing
command should not be sent from the host device, otherwise the resulting
printout will not be satisfactory showing an incorrect layout. The same may
happen if the [FEED] key is pressed to start printing while data is being drawn in
the image buffer.
(3) Performs a forced strip issue in strip wait state.
(4) Programs a threshold value.
[PAUSE] key:
(1) Stops printing temporarily and resumes printing.
(2) Resumes printing after clearing an error.
Key operations while the printer is in online state
In pause state
Press [PAUSE]:
Exits from a pause state.
Hold down [PAUSE]: Moves to the reset menu.
Press [FEED]:
Feeds a paper.
Hold down [FEED]:
Moves to the threshold setting menu.
In error state
Press [PAUSE]:
Recovers from an error.
Hold down [PAUSE]: Moves to the reset menu.
Press [FEED]:
No operation
