-31-
6.3 VALUE SETTING DISPLAY
The value setting display is used for setting a value by increasing or decreasing it.
It is comprised of the following parts.
Display example (English)
The currently programmable item is reverseed. The display of the
symbols like “+” and “-“, and the unit of measure
like “mm” and “step” differs depending on the item to be set.
Setting display with one field
Setting display with multiple fields (placed
horizontally)
Key function (Setting display with one field)
Key
Function
[FEED] + [PAUSE]
Returns to the upper hierarchy without saving changes.
[POWER]
Saves the changes and returns to the upper hierarchy.
[FEED]
Increases the setting value by specified step. When the setting
value reaches the maximum, it goes to minimum.
[PAUSE]
Decreases the setting value by specified step. When the setting
value reaches the minimum, it goes to maximum.
Key operation (Setting display with multiple fields (horizontal))
Key
Function
[FEED] + [PAUSE]
Returns to the upper hierarchy without saving changes.
[POWER]
Proceed to the next set value, and after setting the last set value,
save the change and returns to the upper hierarchy.
[FEED]
Increases the setting value by specified step. When the setting
value reaches the maximum, it goes to minimum.
Title
Sub title
Setting range
Setting value
