-39-
Maintenance Counter
Count Conditions
Total label distance covered
Label distance covered
Counts whenever the paper feed motor is driven, for
example, to feed, print, or exit a label. (Also counts
during a reverse feed operation.)
When the label distance covered reaches the maximum
value, the maintenance counter must be cleared.
Otherwise, the total label distance covered cannot be
updated.
Label print distance
Counts while printing. (Counting is not performed
during a paper exit or reverse feed operation.)
System error count
Counts when a No.18 system error described in the
section, “5.9 LCD MESSAGES AND LED
INDICATIONS”, occurs
(Only system error 13 is counted up)
