-58-
7.3.1
CMD Setting
This setting selects print mode.
B-EP Mode OFF:
TPCL
TPCL1
C Mode
ESC/POS
Z Mode
S Mode
B-EP Mode ON:
TPCL
TPCL1
LABEL
REPEIPT
REPEIPT1
ESC/POS
Default value: TPCL
*Support mode (o
：
valid
、
x
：
invalid
）
TPCL, TPCL1,
LABEL
C Mode
ESC/POS
RECEIPT,RECEIP
T1
Z Mode
S Mode
o
o
o
o
o
7.3.2
Head Division Setting (HEAD DIV)
When a printing ratio per line is high, the value of this setting is changed to prevent print tone from becoming lighter.
AUTO1
Automatic selection from none, 2 division
AUTO
Automatic selection from 2 division (Print quality oriented)
AUTO2
Automatic selection from none, 2 division (Print speed oriented)
Default value: AUTO1 (none, 2 division)
<Commentary>
If it uses normal battery, available conditions of AUTO2 is:
- Ambient temperature is over 10 degree.
- Battery level is over 4.
- Label pitch is less than 63mm.
And the movement is: after every 10 continuous prints, it stops 3 sec.
*Support mode (o
：
valid
、
x
：
invalid
）
TPCL, TPCL1,
LABEL
C Mode
ESC/POS
RECEIPT,RECEIP
T1
Z Mode
S Mode
o
o
o
o
o
