-80-
7.5.1
Feed Amount Fine Adjustment (FEED ADJ.)
This setting sets a feed amount so that the label is shifted forward or backward from the print start position which
has been automatically determined.
Max.
value
Min.
value
Step
Display
Sign
Integer
digit
Decimal
place
0-padding
Unit of
measure
+50.0
-50.0
0.1
Decimal
Exist
2
1
None
mm
Default value: 0.0mm
<Supplemental Explanations>
(1) The printer is controlled by the total amount determined by this command and the Position Fine Adjustment
command sent from the PC. However, the maximum value is ±50.0 mm.
(2) When the feed amount fine adjustment value for the positive (+) direction is set to more than +14.0 mm (the
distance between the print head and the sensor is
–2 mm), the actual print position is corrected by +14.0 mm.
Support mode (o
：
valid
、
x
：
invalid
）
TPCL, TPCL1,
LABEL
C Mode
ESC/POS
RECEIPT,RECEIP
T1
Z Mode
S Mode
o
o
o
o
o
+0.0 mm
+3.0 mm
Print start
position
One label
One label
Print start
position
-3.0 mm
One label
Print start position
Paper feed direction
