-94-
7.6.10
Auto Print(R)
The factory test print is performed on the following conditions. The parameter settings and the print density
fine adjustment value are ignored.
After each test pattern is printed, the factory test print is performed when the [POWER] key is pressed.
When the [PAUSE] and [FEED] key is pressed at the same time, the display returns to the menu.
Other keys are invalid.
Print test pattern
Feeding 1 label
Printing 3-dot slant lines
Printing barcode
Printing characters
Issue count
5 labels each
Sensor type
Reflective sensor
Issue mode
Continuous issue
Label pitch
63 mm
Print density fine adjustment
value
±0
7.6.11
Process Print
