-102-
7.8.3
Maintenance Counter Clear (MAINTE Count)
The maintenance counter, including label distance covered, is cleared.
FEED
ALL
<Supplemental Explanations>
Item of counter clear and default value after clear.
Item of counter clear
default value
after clear
Clear item
All counte
r
FEED
counter
counter
1. FEED
0km
o
o
2. PRINT
0km
o
o
3. SYSTEM ERROR
0
o
<Ex. Contents of maintenance counter>
<< COUNTER >>
TOTAL FEED
4.8km
[QM]
FEED
0.0km 1. FEED
FEED1
4.8km
FEED2
0.0km
FEED3
0.0km
FEED4
0.0km
0.0km 2. PRINT
PRINT1
4.5km
PRINT2
0.0km
PRINT3
0.0km
PRINT4
0.0km
SYSTEM ERR 0 3. SYSTEM ERROR
Print Result of Maintenance Counter Values and Various Parameter Values After Each Type of Clear
Clear when replacing the platen (FEED)
The total feed up to the last feed moves to FEED1 and the FEED1 value moves to FEED2. (The FEED 4
value is cleared.)
Clear when replacing the print head (PRINT)
The total print length up to the last print moves to PRINT1 and the PRINT1 value moves to PRINT2. (The
PRINT 4 value is cleared.)
When clearing every thing (ALL)
Both the FEED and PRINT values move.
