-116-
9.1 Reset
The printer is reset.
9.2 Mode Setting
Same as 7.3 Mode Setting of the system mode.
9.3 Set PARAM
Same as 7.4 Set PARAM of the system mode.
9.4 Adjust Set
Same as 7.5 Adjust Set of the system mode.
9.5 Dump Mode
Print the data sent from the host.
・
On-Demand
Prints 166 lines of data (approx. 50 cm), then stops while
displaying “Printing…”.
Pressing the [FEED] + [PAUSE] key simulataneously causes the printing to stop and
the display to return to the upper hierarchy menu.
Pressing the [POWER], [PAUSE], [FEED] key, restarts printing.
Print All
Prints all data in the receive buffer page by page
8-byte data is printed on one line.
Data is printed, starting from the newest data to the older data.
Print
direction
:
:
00 00 00 00 00 00 00 00 ........
00 00 00 00 00 00 00 00 ........
00 00 00 00 00 00 00 00 ........
00 00 00 00 00 00 00 00 ........
7B 41 58 3B 2B 30 30 30 {AX;+000
2C 2B 30 30 30 7C 7D 7B ,+000|}{
44 30 37 37 30 2C 31 31 D0760,11
37 34 30 7C 7D 7B 43 7C 740|}{C|
7D 7B 4C 43 30 2C 30 30 }{LC0,00
32 30 2C 30 30 33 30 2C 20,0030,
2C 30 2C 32 7C 7D 7B 4C ,0,2|}{L
43 3B 30 30 30 32 30 2C C;00020,
30 30 37 30 2C 30 36 36 0070,066
39 7C 7D 7B 4C 43 3B 30 9|}{LC;0
:
:
:
:
44 45 46 47 48 49 4A 7C DEFGHIJ|
7D 7B 50 43 33 35 30 2C }{PC350,
30 34 30 30 2C 31 2C 31 0400,1,1
30 2C 42 3D 41 42 43 44 0,B=ABCD
:
:
3B 30 39 30 30 2C 30 31 ;0900,01
38 30 2C 54 35 2C 41 2C 80,T5,A,
30 3D 31 32 33 34 35 36 0=123456
41 42 43 44 45 7C 7D 00 ABCDE|}..
