-82-
7.5.3
Print Tone Fine Adjustment (Tone Adjust)
This setting finely adjusts the print tone against the value automatically set.
Max.
value
Min. value
Step
Display
Sign
Integer
digit
Decimal
place
0-padding
Unit of
measure
+30
-30
1
Decimal
Exist
2
0
None
step
Default value: 0step
<Supplemental Explanations>
Tone
“+” means Darker,”-“ means lighter.
+30
<- Darker <-
0(standard)
-> Lighter -> -30
The printer is controlled by the total amount determined by this command and the Position
Fine Adjustment command sent from the PC. However, the maximum value is ±30 step.
Support mode (o
：
valid
、
x
：
invalid
）
TPCL, TPCL1,
LABEL
C Mode
ESC/POS
RECEIPT,RECEIP
T1
Z Mode
S Mode
o
o
o
x
x
7.5.4
Reflective Sensor Manual Threshold Fine Adjustment (REFL Sensor)
Max.
value
Min. value
Step
Display
Sign
Integer
digit
Decimal
place
0-padding
Unit of
measure
4.0
0.0
0.1
Decimal
None
1
1
None
V
Default value: 1.0V
<Supplemental Explanations>
This setting is effective only in the TPCL and TPCL1 modes.
