7. B-FV Setting Tool
EO18-33030
7.4 Working with B-FV Setting Tool (V1.0.27)
7-46
Property Name
Description
Auto Head Check
Enable
Your printer checks broken pins on the printhead
automatically once your printer is turned on.
Disable
Disable the auto head check.
Auto Calibration
ON (Power on)
Your printer automatically calibrates media using a
media sensor once it restarts or is turned on.
ON (Power on and Head close)
Your printer automatically
calibrates media using a media sensor every time you close the print
module when the printer is turned on.
OFF
You need to manually calibrate media using a media sensor
as you change the media, or your printer won’t work properly.
(
Note *2
)
Reprint After Error
Enable
Your printer when caused by the error condition. The label
is reprinted as soon as the error condition is corrected.
Disable
Disable the reprint after error.
Control Code
It is the control code used by Toshiba Printer Control Language
(TPCL).
Auto
B-FV Setting Tool detects the control code automatically.
[ESC] [LF] [NUL]
or
{|}
You need to use either one of them as the
control code when inputting commands, or your printer won’t
process them properly.
Forward Feed Wait
ON
Your printer moves the paper forward in a predefined length 1
second after printing, and pulls the paper back in a predefined length
once the printing begins again. (
Note *2
)
OFF
Your printer won’t move the paper at all.
X-coordinate
Move the print position horizontally. The positive number is right, and
the negative number is left. The range is -99.5 ~ +99.5, and the
value is adjustable in increments of ± 0.5 mm.
BASIC interpreter
Enable
Your printer can convert BASIC programs to TPCL
commands.
Disable
Disable the BASIC interpreter.
Destination
The region code of your printer model.
Notes
*1) This setting is available only for the B-FV4T model. For other models, it cannot
be changed, and will be fixed “
Disable
”.
*2) This setting cannot be changed for the B-FV4D-GL model, and the parameter
for the setting will always be fixed.
The contents provided here are applied for the B-FV Setting Tool (V1.0.27 or later).
Summary of Contents for B-FV4 Series
Page 41: ...2 ELECTRONICS SPECIFICATIONS EO18 33030 2 2 Main PC Board Layout 2 4 B FV4D GH B FV4D GL ...
Page 301: ...APPENDIX EO18 33030 APPENDIX Establishing a Bluetooth connection with B FV4D and B FV4T A 8 ...
Page 302: ...1 11 1 OSAKI SHINAGAWA KU TOKYO 141 8562 JAPAN E PRINTED IN JAPAN EO18 33030H ...
