7. B-FV Setting Tool
EO18-33030
7.4 Working with B-FV Setting Tool (V1.0.27)
7-48
Property Name
Description
Width
Set the print width. The range is 0 ~ +101.6, and the value is
adjustable in increments of ± 0.1 mm.
Height
Set the length of the label when using continuous media. The range
is 0 ~ +5461.0, and the value is adjustable in increments of ± 0.1
mm.
X-coordinate
Move the print position horizontally. The positive number is right, and
the negative number is left. The range is -800 ~
+800, and the value is adjustable in increments of ± 1 dot.
Y-coordinate
Move the print position vertically. The positive number is
forward, and the negative number is backward. The range is -
800 ~ +800, and the value is adjustable in increments of ± 1 dot.
Tear Off
Adjust the rest position of the media after a label is printed, which
changes the position at which the label is torn or cut. The range is
-12.0 ~ +12.0, and the value is adjustable in increments of ± 0.1 mm.
COM
The
COM
tab provides the settings of the RS-232C port. When you use COM as your port, make
sure the settings in the
COM
tab are the same as the port settings, or your printer won’t work
properly.
Property Name
Description
Baud Rate
The rate of signals transmitted per second. The larger the number,
the faster the data transmission.
Data Length
The length of the data transmitted. It can be set to
7
or
8
bits.
Parity
It can be set to
Odd
,
Even
or
None
. A parity bit is added to a string
of data bits to check if the data is correct.
Odd
The total number of “ones” in the data plus the parity bit is an
odd number.
Even
The total number of “ones” in the data plus parity bit is an
even number.
Summary of Contents for B-FV4 Series
Page 41: ...2 ELECTRONICS SPECIFICATIONS EO18 33030 2 2 Main PC Board Layout 2 4 B FV4D GH B FV4D GL ...
Page 301: ...APPENDIX EO18 33030 APPENDIX Establishing a Bluetooth connection with B FV4D and B FV4T A 8 ...
Page 302: ...1 11 1 OSAKI SHINAGAWA KU TOKYO 141 8562 JAPAN E PRINTED IN JAPAN EO18 33030H ...
