7. B-FV Setting Tool
EO18-33030
7.6 Working with B-FV Setting Tool (V1.0.34)
7-127
Tool
Tool
is used to send specific commands to your printer. It has the
Single Command
tab, which
provides six commands.
￭
Reboot Printer
Restart your printer.
￭
Reset To Factory
Reset factory settings for your printer.
Note
When you select
Reset to Factory
and click
Send
, all setting parameters in
the printer will be returned to the factory default values. In this case, however, the
factory default values are not reflected to B-FV Setting Tool.
Therefore, when you want to change the printer parameters after initializing the
printer, perform the following in B-FV Setting Tool:
1) Select
Reset to Factory
and click
Send
for initializing the printer.
2) Click
Get
for obtaining factory default values, on the tab which you want to set.
3) When completing the setting, click
Send
for sending the changed parameters
to the printer.
￭
Self Test
Run a self test to print a configuration label.
￭
Change Emulation:
Change the emulation language for your printer.
￭
Media Calibration:
Change the media sensor for your printer.
￭
Ribbon Calibration:
It calibrates the ribbon so that your print start position will be more
accurate.
-
RESET
Turn off Ribbon Calibration.
-
ON
Turn on Ribbon Calibration. Enter the height of your label in the scale box.
For example, if the height of your label is 100 mm, enter 100 in the box.
Summary of Contents for B-FV4 Series
Page 41: ...2 ELECTRONICS SPECIFICATIONS EO18 33030 2 2 Main PC Board Layout 2 4 B FV4D GH B FV4D GL ...
Page 301: ...APPENDIX EO18 33030 APPENDIX Establishing a Bluetooth connection with B FV4D and B FV4T A 8 ...
Page 302: ...1 11 1 OSAKI SHINAGAWA KU TOKYO 141 8562 JAPAN E PRINTED IN JAPAN EO18 33030H ...
