1. OUTLINE
EO18-33030
1.6 Supply Specifications
1-22
B-FV4D-GS/TS
Unit: mm (inch)
Issue mode
Item
Batch mode
Batch mode
(Tear-off)
Strip mode
Cut mode
Media width
(Including backing paper)
25.4 to 118.0 (1.00 to 4.65)
Label width
22.4 to 115.0 (0.88 to 4.53)
Media pitch
Label
10 to 999
(0.39 to 39.3)
25.4 to 152.4
(1.0 to 6.0)
(See NOTE4)
25.4 to 999
(1.0 to 39.3)
(See NOTE2)
Tag
10 to 999
(0.39 to 39.3)
-----
25.4 to 999
(1.0 to 39.3)
(See NOTE2)
Label length
8 to 997
(0.31 to 39.2)
23.4 to 150.4
(0.92 to 5.92)
(See NOTE4)
19.4 to 993
(0.76 to 39.1)
(See NOTE2)
Gap/black mark length
2.0 to 10.0 (0.08 to 0.39)
6.0 to 10.0
(0.24 to 0.39)
Black mark width
Min. 8.0 (0.31)
Thickness
0.06 to 0.19 (0.0024 to 0.0075)
Max. outer roll diameter
Ø127 (5.0)
Ø203.2 (8.0): When the optional External Media Stand is used.
Roll direction
Outside (standard), Inside
(See NOTE 2)
Inner core diameter
25.4, 38.1, or 76.2 (1.0, 1.5, or 3.0)
(See NOTE 2)
NOTES:
1. To ensure print quality and print head life use only TOSHIBA TEC CORPORATION approved media.
2. When you use inside wound media in cut mode, the specifications are restricted as follows:
- Media pitch (Label): 25.4 mm to 84.2 mm (1.0” to 3.31”)
- Media pitch (Tag): 25.4 mm to 84.2 mm (1.0” to 3.31”)
- Label length: 23.4 mm to 76.2 mm (0.92” to 3.0”)
-
Inner core diameter:
76.2 mm (3.0”)
3. When using a media roll of 76.2-mm (3”) inner core diameter, the 3”-Diameter Media Shaft included in the
optional External Media Stand is required.
4. When you use inside wound media in strip mode, the specifications are restricted as follows:
- Media pitch (Label): 25.4 mm to 84.2 mm (1.0” to 3.31”)
- Label length: 23.4 mm to 76.2 mm (0.92” to 3.0”)
B-FV4D-GH
Unit: mm (inch)
Issue mode
Item
Batch mode /
Batch mode (Tear-off)
Strip mode
Media width
(Including backing paper)
105 (4.1) +1.0/-1.5
Label width
102 (4.0)
Media pitch
10 to 999 (0.39 to 39.3)
See NOTE 2.
25.4 to 152.4 (1.0 to 6.0)
See NOTE 2.
Label length
8 to 997 (0.31 to 39.2)
See NOTE 2.
23.4 to 150.4 (0.92 to 5.92)
See NOTE 2.
Gap length
2.0 to 10.0 (0.08 to 0.39)
Thickness
0.06 to 0.19 (0.0024 to 0.0075)
Max. outer roll diameter
Ø127 (5.0)
Roll direction
Outside (standard), Inside
(
See NOTE.2)
Inner core diameter
25.4, 38.1
(
See NOTE 2
.)
NOTES:
1. To ensure print quality and print head life use only TOSHIBA TEC CORPORATION approved media.
2. When you use inside wound media, the specifications are restricted as follows:
Issue mode
Batch mode / Batch mode (Tear-off)
Strip mode
Media pitch
10 to 999 (0.39 to 39.3)
25.4 to 86.2 (1.0 to 3.39)
Label length
8 to 997 (0.31 to 39.2)
23.4 to 76.2 (0.92 to 3.0)
Inner core diameter
38.1 (1.5)
38.1 (1.5)
Summary of Contents for B-FV4 Series
Page 41: ...2 ELECTRONICS SPECIFICATIONS EO18 33030 2 2 Main PC Board Layout 2 4 B FV4D GH B FV4D GL ...
Page 301: ...APPENDIX EO18 33030 APPENDIX Establishing a Bluetooth connection with B FV4D and B FV4T A 8 ...
Page 302: ...1 11 1 OSAKI SHINAGAWA KU TOKYO 141 8562 JAPAN E PRINTED IN JAPAN EO18 33030H ...
