1. PRODUCT OVERVIEW
ENGLISH VERSION
EO1-33047
1.1 Introduction
E1- 1
1. PRODUCT
OVERVIEW
1.1 Introduction
1.2 Features
Thank you for choosing the TOSHIBA B-SA4TM series thermal printer.
This Owner’s Manual contains from general set-up through how to
confirm the printer operation using an online test print, and should be
read carefully to help gain maximum performance and life from your
printer. For most queries please refer to this manual and keep it safe for
future reference. Please contact your TOSHIBA TEC representative for
further information concerning this manual.
This printer has the following features:
•
Space-saving design
An area required to place a printer is about A4 size, in spite of both
media and ribbon being loaded inside it. Also, the Top Cover is opened
upward, which saves the installation space.
The optional cutter module and strip module are as slim and small as
the Front Cover.
•
Various kinds of interface
Various kinds of interface are provided:
<Standard> <Option>
•
Parallel
•
Serial
•
USB
•
Wireless LAN
•
Built-in LAN
•
Expansion I/O
•
Superior hardware
Clear print is realized by an 8 dots/mm (203 dpi) (B-SA4TM-GS12) or
11.8 dots/mm (300 dpi) (B-SA4TM-TS12) print head, at a printing
speed of 50.8 mm/sec. (2 inches/sec.), 101.6 mm/sec. (4 inches/sec.), or
152.4 mm/sec. (6 inches/sec.)
•
Heavy-duty enclosure
As the enclosure is made of metal, the printer can be used in an
industrial environment such as a factory.
•
Easy maintenance
Design of the printer is simple. Especially, attachment and removal of
the print head and platen are very simple, which makes maintenance
easy.
•
A variety of options
The following optional devices are available:
•
Cutter module
•
Strip module
•
Serial interface board
•
Wireless LAN board
•
RFID module
•
300-dpi print head
•
Expansion I/O board
•
Real Time Clock
