1. PRODUCT OVERVIEW
ENGLISH VERSION
1.
1
Accessories
1. PRODUCT
OVERVIEW
1.1 Introduction
Thank you for choosing the B-SV4T series barcode printer. This Owner’s
Manual contains valuable information from general set-up to confirming
the printer's operation using test prints. You should read it carefully to help
you gain maximum performance and life from your printer. This manual
should be kept close at hand for everyday reference.
Please contact your TOSHIBA TEC representative for further information
concerning this manual.
1.2 Features
This printer has the following features:
•
This printer is equipped with a 32-bit RISC processor, which offers
up to 5 inches/sec. print speed.
•
A standard USB interface for convenient label printing connectivity.
•
The clamshell design and moveable media sensor enable easy media
loading and use of a wide range of media.
•
All frequently used bar code formats are available in this printer.
Fonts and bar codes can be printed in any rotation.
•
This printer provides a choice of six different type faces of
alphanumeric font, and outline font printing capability.
•
This is the most cost-effective and high performance printer in this
class.
1.3 Unpacking
Unpack the printer as per the Unpacking Instructions supplied with the
printer.
NOTES:
1. Check for damage or
scratches on the printer.
However, please note that
TOSHIBA TEC Europe shall
have no liability for any
damage of any kind sustained
during transportation of the
product.
2. Keep the cartons and pads for
future transportation of the
printer.
When unpacking the printer, please check that the following accessories
are supplied with the printer.
1.4 Accessories
CD-ROM (1 copy)
Power Adapter
(P/No.: 62-0010047-00)
Ribbon Spindle
(P/No.: 98-0130019-10)
Label Spindle
Label Spindle Fixing Tab
1.5 inch Paper Core Adapter
E1- 1
