12
AM
START/STOP
PRESET
ON
OFF
˚
C
:
AM
:
AUT
UTO
MODE
AUTO
FAN
ECO
TIMER
TIMER
Hi POWER
SWING
MEMO
FIX
FILTER
RESET CLOCK CHECK
ON
OFF
SET
CLR
1
2
3
4
TIMER OPERATION
ON timer and OFF timer
Setting TIMER
1
ON/OFF TIMER button
Push the ON or OFF TIMER buttons as required.
• The previous timer setting is displayed and flashes at the same time
as the ON/OFF TIMER display.
2
TIMER button
Push the TIMER button.
Set the timer to the desired time.
Each push of the TIMER button changes the time by ten minute incre-
ments.
Pushing the TIMER button continually changes the time in one hour
increments.
3
SET
SET
button
Push the SET
SET
button to set the timer.
The set time for the timer is displayed and the timer starts.
4
CLR
button
Push the CLR
button to cancel the timer setting.
CAUTION
• When you select the timer operation, the remote controller automatically transmits the timer signal to
the indoor unit at the specified time.
Therefore, keep the remote controller in a location where it can transmit the signal to the panel properly.
• If you do not push the SET
SET
button within 30 seconds after setting the time, the setting will be can-
celled.
Once you select the timer operation mode, the settings are saved in the remote controller.
Thereafter, the air conditioner will start operating under the same conditions when you simply push the ON/
OFF button of the remote controller.
If the clock display is flashing, you cannot set the timer.
Follow the instructions in the section “Setting the clock” on page 7 to set the clock and then set the timer.
