13
CONNECTIONS
Wired Network Connection
LAN
USB
HDMI OUT
ANALOG
COAXIAL DIGITAL
LAN
WAN
LAN
1
2
3
4
5
LAN
Internet
LAN cable
LAN cable
Hub or broadband router
Networking equipment
(modem, etc.)
Your
Blu-ray Disc™
player can be connected to your home network:
By connecting an Ethernet cable to the ETHERNET jack on the rear of your player and to a wired hub or router. Using
•
a wired network provides the best performance, because the attached devices connect directly to the network and
are not subject to radio frequency interference.
Connecting your player to a wired router
Connect an Ethernet cable (CAT5 or better with RJ45 connector) to the
•
ETHERNET
jack on the back of your player
and to an Ethernet jack on a hub or broadband router.
Notes:
Do not connect a modular phone cable to the
•
ETHERNET
jack.
When plugging or unplugging the cable, hold the connector on the end of the cable. When unplugging, do not pull
•
on the cable. Press down the lock tab and pull the connector out of the jack.
Because there are various connection confi gurations, follow the instructions from your telecommunication carrier or
•
Internet service provider.