14
Connections
Notes:
This unit is compatible with TOSHIBA’s Wireless LAN Adapter only.
•
Model name: WLM-10UB1 or WLM-10UN1
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of
•
the wireless network.)
Wireless LAN, in its nature, may cause interference, depending on the use condition (AP performance, distance,
•
obstacle, interference by other radio devices, etc.).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
•
When applying the security key for the AP (wireless IP sharer), only the following is supported.
•
1) Authentication Mode : WPAPSK, WPA2PSK
2) Encryption Type : WEP, TKIP, AES
Wireless Network Connection
(Need the OPTIONAL Wi-Fi unit of sold separately)
Your
Blu-ray Disc™
player can also be connected to network with a Wireless access point.
1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the
USB port on the rear panel of the
Blu-ray Disc™
Player, and set the wireless network options (See Step
2 ~ 3
).
2. After the Wi-Fi device is inserted into the USB slot, press / to select “
Network
” from
Settings
, and press
OK
to
enter.
3. Press / to select “
Wireless
”, and press
OK
to enter.
(For detailed information, please refer to the user guide for WLM-10UB1 or WLM-10UN1.)
LAN
HDMI OUT
ANALOG
COAXIAL DIGITAL
Wireless access point
Modem Cable
Modem Port
Wireless LAN
Adapter
USB
USB
Wired
Network Test
Wireless
