background image

 

 
 

 

FIRMWARE INSTALLATION NOTICE 

MODEL: BDX3500KU 

The installation process is simple; however, please read all of the following instructions and notices prior to installation.  This firmware 
update is intended solely for use with the TOSHIBA Models indicated above.   

 

Notice   (Read Prior to Beginning the Firmware Upgrade) 

The following events may interrupt the upgrade process and result in an inoperative unit. 

1) 

DO NOT unplug the Power Cord during the firmware update procedure. 

2) 

Avoid loss or interruption of power during the firmware update procedure. 

3) 

DO NOT Press the power button on the unit during the firmware update procedure. 

If you are experiencing problems or have further questions:

 

Customers should contact Toshiba Customer Service at 800-631-3811. 

Toshiba Authorized Service Providers should contact Toshiba Technical Support Group. 

 

 
Prior to using this installation procedure, the correct software must be provided by Toshiba or downloaded to a 
USB thumb drive from an authorized Toshiba website.   
 

 

Create a folder in the USB drive and name it “

UPG

” 

When downloading from a website, extract the compressed (zipped) files directly to a newly formatted USB 
thumb drive.  Do not alter the file or folder structures.

  (Note: When formatting the USB use the “FAT” file 

system) 

 

Copy the extracted files into the “

UPG

 

folder you created.

 

 
Use the following procedure to update the Media Player firmware version: 

 

1)  Place the 

Media

 Player in the 

“On”

 position.  Remove any discs from the 

Media

 Player. 

 
2)  Turn 

“On”

 the TV receiver of which the 

Media

 Player is connected.  Select the input used for the Media Player.  

 
3) 

“Insert the USB Thumb Drive with the firmware” 

copied to the drive into the USB port located on the back 

side of the unit. 

 
4)  Press Menu button and select Setting/System/Upgrade/USB Storage. When the Media Player finds the new 

firmware (Fig 1b) Press OK to start firmware upgrade. 

DO NOT POWER OFF OR PRESS ANY KEY ON THE 

REMOTE CONTROL UNTIL AFTER COMPLETION OF THE UPDATE!!!  DO NOT REMOVE USB Thumb 
DRIVE UNTIL THE UPDATE FULLY COMPLETES!!!

                                    

                    

 

     

 

 

 

 

        

Figure 1a   

 

 

 

 

 

 

Figure 1b 

 
 

 

 

 

 

 

 

 

           

Figure 1c 

 

 

 

 

 

 

Figure 1d 

Reviews: