86 / 92
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
http://www.toshiba-teli.co.jp/en/
D4253386C
● Setting
- Register to the sequence
Set the sequence number
to “SequentialShutterIndex” register, and set the UserSet number to
“SequentialShutterEntry” registers. These setting values are Integer type.
SequentialShutterIndex
setting value
Minimum
(*)
1
Maximum
16
* initial factory setting
SequentialShutterEntry
setting value
Minimum
(*)
UserSet1
Maximum
UserSet15
* initial factory setting
- Register the loop termination
Set the number of Index to repeat to “SequentialShutterTerminateAt” register.
For example, If you set [3] to
“SequentialShutterTerminateAt” register, camera captures the images of
Index1, Index2 and Index3. Then repeats capturing the images of Index1, Index2
…
- Set the activation of Sequential Shutter
Set the following value to “SequentialShutterEnable” register. The setting value is Boolean type.
setting value
function
OFF (*)
Inactive
ON
Active
* initial factory setting
