Stratagy ES Model C1 Installation Guide 12/01
1
Stratagy ES Model C1 Installation Guide
This guide gives the initial steps to set up the Stratagy Enterprise Server (ES) Model C1 hardware.
Please read the entire contents of this guide before beginning installation. See your Stratagy ES
I&M Manual for additional details.
Before You Start
CAUTION!
Always handle the Stratagy ES with care. Avoid dropping or jarring the unit by
keeping the system in a secure position on a flat surface.
Electrostatic discharge can damage or destroy the components in the server.
Before starting this procedure, use an anti-static wrist strap to discharge any
static electricity you may be carrying.
1. Check the packing list on the side of the carton to make sure that you have received all the
items.
2. Make sure that you have a Phillips screwdriver.
Step 1: Remove Cover
➤
Facing the back panel of the server, unlock the latch, push up on the cover latch (blue) located
in the middle back and pull the cover towards you and away from the unit.
Step 2: Unpack Voice Boards
➤
Unbox the Dialogic voice board(s) to be installed in this system.
Important!
Discard any instructions that may be in the Dialogic voice board box. Instead,
follow the instructions here and in the Stratagy ES I&M Manual.
Summary of Contents for C1
Page 15: ......