22
Getting Started
Inserting and removing an SD™ Card
❖
The battery is a lithium ion battery, which can explode if not
replaced, used, handled or disposed of properly. Dispose of the
battery as required by local ordinances or regulations. Use only
batteries recommended by TOSHIBA as replacements.
❖
Charge the battery only in an ambient temperature between 32
and 104 degrees Fahrenheit (0 and 40 degrees Celsius).
Otherwise, the electrolyte solution might leak, battery
performance might deteriorate and the battery life might be
shortened.
❖
Never install or remove the battery without first turning off the
power and disconnecting the AC adaptor.
Inserting and removing an SD™ Card
An SD™ Card may need to be purchased separately.
Your camcorder comes with an SD
™
Card slot that allows you to
expand the memory capacity by using an optional
SD/SDHC/SDXC memory card.
1
Slide the safety latch and open the battery / SD
™
Card cover.
(Sample Illustration) Opening the battery / SD
™
Card cover
NOTE