Float switch assembly
Fixing screw (Ø4 × 25)
Hole of float switch assembly
Projection of drain pan
Float switch assembly
Fixing screw (Ø4 × 25)
Projection of drain pan
Fixing screws (Ø4 ×
8
)
Fixing screws (Ø4 ×
Fixing screws (Ø4 ×
8
)
No.
9
Part name
Float switch
assembly
Procedure
1. Detachment
1) Carry out works of item 1 of 7 and works
from 1) to 5).
2) Remove the fixing screw and then remove
the float switch assembly. (Ø4 × 25, 1 pc.)
2. Attachment
1) Mount the float switch assembly as before
with the fixing screw.
NOTE :
When mounting, match hole of the float switch
assembly with projection of the drain pan.
2) Mount the bell mouth as before.
(Ø4 × 10, 8 pcs.)
3) Following to works of item 2 of 7 and
works from 2) to 5), attach the parts as
before.
Remarks
10
Drain pan
1. Detachment
1) Carry out works of item 1 of 4 , item 1 of
6 , item 1 of 7 and works from 2) to 5).
2) Remove the fixing screws to remove the
drain pan. (Ø4 ×
8
, 4 pcs.)
2. Attachment
1) Fix parts as before in order of drain cap
→
drain pan
→
bell mouth.
2) Following to works of item 2 of 7 and
works from 2) to 5), attach parts as before.
- 90 -
Summary of Contents for Carrier MMU-AP0074HPUL
Page 15: ...2 WIRING DIAGRAM 15 ...
