Remote controller with weekly timer
Owner’s Manual
– 15 –
EN
4
Push the button (37).
• Each time the button is pushed, the
number on the numeric display changes in
the following sequence.
• Stop pushing the button when the number
to be programmed blinks on the display.
* For the items inside the square
parentheses, refer to the “Editing the
operation programs” section.
5
Push the button (42).
• The program number on the numeric
display stops blinking and lights up.
6
Push the TIME
and
buttons
(40).
• Set the operation time. This time must be
input.
• The steps taken are the same as for setting
the clock.
* After setting the time, there is no need to
push the
button (42). All the items will
be entered together in step
8
.
7
Set what is to be operated at the time
which was set in step 6.
* The settings can be established in any
sequence.
The functions will differ depending on the
model and system.
1. Selecting and setting operation/stop
Each time the
button (48) is pushed, what
appears on the timer function display changes
in the following sequence. Stop pushing the
button when the desired operation blinks on
the display.
2. Selecting and setting the operation mode
Each time the
button (34) is pushed,
what appears on the operation mode display
(1) changes in the following sequence. Stop
pushing the button when the operation mode
blinks on the display.
3. Setting the temperature
Each time the TEMP.
and
buttons
(49) are pushed, what appears on the numeric
display changes in the following sequence.
Stop pushing the buttons when the target
temperature to be set blinks on the display.
4. Setting the restriction on the button operations
• Each time the
button (34) is pushed
while the
button (43) is held down, the
central control display changes from off to
blinking or vice versa.
To place the restriction on the button
operations, ensure that the display is
blinking.
* The
button (32),
button
(34) and TEMP.
and
buttons
(49) are the buttons whose operation
will be restricted by this setting.
For further details, refer to the “Selecting
the remote controller functions” section.
(No display)
Operation
continue
Operation
stop
Operation
start
(No display)
Operation mode
Fan
Cooling
Auto
Heating
Dry
Push
4 seconds or more
or
Push
4 seconds
or more
Frost protection
operation
14-EN
+00EH99677901_01EN_OM_Remo_Weekly_UL.book Page 15 Thursday, October 8, 2009 2:03 PM
Summary of Contents for Carrier RBC-AMS41UL
Page 26: ...EH99677901 ...