26
Reference Section
Advanced Operation
Basic Operation
Set up
Preparation
TIMER
POWER
CH RTN
SUR
ADV
ADV
MUTE RECALL
TV/VIDEO SURROUND
REC
TV/VCR
REW
FF
STILL LOCATE SWAP
STOP SOURCE
PLAY PIP
+
FAV
C.CA
PT
RESET
XD
S
EX
IT
-
FAV
VOL
CH
MENU
1
4
7
2
5
8
3
6
9
0
ENT
100
TV
CABLE
VCR
MTS
MENU
VOLUME
CHANNEL
TV/VIDEO
POWER
Programming Your Favorite Channels
The Favorite Channel Programming feature allows you to program up to 12 of your favorite channels.
Once programmed, you can use the
FAV
t
/
s
buttons on the Remote Control to scan through only your favorite channels,
skipping other channels you do not normally view.
You can use the
CHANNEL
s
/
t
buttons to scan through all the channels you have programmed into the TV’s memory.
Programming your favorite channels
1
Select a channel you want to program.
Example: channel 2
2
2
Press
MENU
until the Setup menu is
displayed on the screen.
3
Press
s
or
t
until “FAVORITE CH” is
displayed in purple.
FAVORITE CH
[SET]CLEAR
0 0 0 0
0 0 0 0
0 0 0 0
[TV:CYAN,CABLE:BLUE]
SELECT[
T
S
] SET[
t s
]
4
Press
T
or
S
to display the FAVORITE CH
program menu.
Each time you press
T
or
S
, you are guided
between “SET” and “CLEAR”.
5
To program channels:
Select “SET”. Then press
s
or
t
until the
channel number to be programmed (“2” in
this example) replaces “0” on the display.
To erase channels:
Select “CLEAR”. Then press
s
or
t
until
“0” replaces the channel number to be
erased, “2” for example.
6
Repeat steps 1 to 5 for other channels.
TIMER:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
V-CHIP CONTROL
0 MIN
[TV]CABLE
[ADD]ERASE
FAVORITE CH
MOVE[
t s
] START[
T
S
]
Selecting your favorite channels
To select the favorite channels you have programmed, use the
FAV
t
/
s
buttons on the Remote Control instead of using the
CHANNEL
s
/
t
buttons
.
Note:
The
FAV
t
/
s
buttons cannot function if you have not programmed your
favorite channels.
FAVORITE CH
SET[CLEAR]
2 0 0 0
0 0 0 0
0 0 0 0
[TV:CYAN,CABLE:BLUE]
SELECT[
T
S
] CLEAR[
t s
]
MENU
T
/
S
/
t
/
s
MENU
s
t
S
FAV
s
T
FAV
t